|
| Ονομασία μάρκας: | BH |
| Αριθμός μοντέλου: | 368F |
| MOQ: | 1 |
| Τιμή: | negotiable |
| Όροι πληρωμής: | T/T |
| Ικανότητα εφοδιασμού: | 2000 ΣΕΤ/ΕΤΟΣ |
The BHM368F Edge Banding Machine is a fully automated straight-line edging unit built for small to medium-sized woodworking shops and panel processing facilities. This compact machine measures 3500mm long, 750mm wide, and 1500mm tall, with a shipping weight of 1000kg.
Its variable-speed conveyor runs at 16 meters per minute, accepting board thicknesses from 10mm up to 60mm and edge strips between 0.3mm and 3mm. The smallest workpiece dimensions allowed are 50mm across and 70mm along the feed direction.
Operating on 380V/50Hz power with a total consumption of 7kW and requiring shop air at 0.7MPa, the BHM368F relies on an encoder-driven motion system alongside a time-logic PLC controller. The complete production sequence covers glue spreading, end flush cutting, profile trimming, ripple removal, and final surface polishing—all in one uninterrupted pass.
| Weight | 1000kg |
| Motor power | 7kw |
| Overall size | 3500×750×1500mm |
| Feed speed | 16m/min |
| Panel thickness | 10-60(mm) |
| Voltage | 380 V 50Hz 3Phase (Optional) |
A dedicated encoder monitors and directs all mechanical movements, delivering quick reaction times and a consistently low rate of operational faults.
The onboard PLC uses simple timing principles rather than complex programming, making setup easy for shop floor personnel while maintaining cycle-to-cycle consistency.
The heated glue vessel features an internal spiral mechanism that distributes molten bonding agent uniformly across the entire panel edge, eliminating weak spots and preventing glue waste.
A single-rail carriage assembly drives the cutoff knives, precisely shearing overhanging edge material from both board ends and leaving them perfectly aligned with the panel faces.
A bevel-oriented, high-speed motor paired with a durable alloy disc produces a scratch-free, uniformly smooth edge contour with simple operator adjustments.
The scraping station removes wavy tooling marks left by non-linear cutting actions during the trimming phase, resulting in clean, flat upper and lower edge surfaces.
A soft-rotary buffing wheel provides a polished finish to the sealed edge, improving visual appeal and creating a smooth, pleasant-to-touch surface.
Weighing in at 1000kg, the machine offers a solid, vibration-resistant platform while occupying a relatively small footprint suitable for crowded workshop layouts.
The BHM368F is particularly well-matched to the following production scenarios:
PLC microcomputer control, using the principle of time control, greatly increases stability and safety.
The glue coating device heats hot melt adhesive through a glue pot and uses a spiral structure to evenly apply glue, ensuring a strong adhesive force.
Qitou adopts a single guide rail to cut the edges of the board at both ends.
High speed oblique cutting motor, adjustable operation is more convenient, and the alloy disc ensures smooth and even trimming.
Used to eliminate ripple marks caused by non-linear cutting processes during edge trimming, making the upper and lower parts of the edge material smoother and neater.
Polishing makes the edge sealing section smoother and more effective.
Βίντεο
Βίντεο
Βίντεο
Βίντεο
Διεύθυνση
Χουάνγκντάο
Τηλ.
86--13678862703
Ηλεκτρονικό ταχυδρομείο
Sales@baihangmachinery.com
